MecLock Safeguards

71 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com Step 11 Safety switch Code Position closed P10 P10 Step 11 not selectable SB50 Step 9 not selectable PT10 Step 12 Safety switch Step 9 Motor control Code Open, close, intermediate position (half stroke) SB50 E98M5K03B Step 10 Actuator position ALENA Step 13 Color AE203030 Step 8 Actuator Further information about single configuration steps and closing times can be found in the appendix starting on p .211 . Appropriate accessories can be found in the appendix on p .223. Step 8 Actuator Code Actuator 32/3 (230 V) with PLC, i = 5.45 AE203030 Actuator 32/3 (230 V) with Profinet, i = 5.45 AE223030 Actuator 32/3 (230 V) with PLC STO, i = 5.45 AE233030 Actuator 32/3 (230 V) with Profinet STO, i = 5.45 AE253030 Achievable speeds depending on stroke, dimensions and pane material see p. 236. Step 12 Safety switch type Code Euchner CES-A-LNN-SC M8 / CES-A-BBN* PT10 Euchner CES-I-AP-U-C04-SK M8 / CES-A-BBN-C04 PT12 Euchner CES-I-AP-U-C04-USI M12 / CES-A-BBN-C04 PT14 Pilz PSEN cs3.1p M8 / PSEN cs3.1 PT20 Pilz PSEN cs3.1 M12/8-0.15m / PSEN cs3.1 PT25 Schmersal RSS260-D-ST M8 / RST260-1 PT32 Sick STR1-SASM0AC5 M12 PT50 *) An external evaluation unit is required for this type. Matching evaluation units see accessories on p .229. Connection cable length safety switch 10 m. The remaining cable length for the safety switch integration de- pends on the selected stroke and the cable outlet position. Step 14 Labeling Code German, English, Strasser logo DEEN01 Language 1, Language 2, Strasser logo xxxx01 Language 1, Language 2, without logo xxxx00 xx = 2-digit ISO country code (see p .220) e.g. DEFR01 =Warnings in German and French and logo Step 13 Color Surface, gloss level Code Aluminum  natural anodized ALENA RAL color (4-digit number) smooth, glossy xxxxGLGLZ Contact bar in RAL 1003 signal yellow, smooth glossy only. (Overview RAL colors see p. 218) Step 15 – Options Interlock Code External control, electrically operated, with ifm GF711S safety switch Z2E280 External control, electrically operated, with Sick IME2S12-04B4DC0 safety switch Z2E290 DEEN01 – … Step 14 + 15 Labeling + Options Step 10 Actuator position Code Top right at rear, straight E98M5K03B Top left in front, straight E72M5K03B The power connections are located directly on the drive unit. All connection cables are available separately. Available cable lengths see accessories on p.230. Side view right drive position rear (detail) E98M5K03B (machine side) Front view (drive position rear right) Front view (drive position front left) Side view left drive position in front (detail) E72M5K03B (operator side)