MecLock Safeguards

51 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com Step 10 Safety switch Code Position closed P10 PT10 Step 11 Safety switch E15 Step 9 Energy connection ALENA Step 12 Color P10 Step 10 not selectable S10 Step 8 Speed Proximity switch type Code Festo SMT-8M NZT10 Connection cable approx. 10 m long from outlet position. … Step 14 Options DEEN01 Step 13 Labeling Step 9 Energy connection Code Bottom left, outlet straight down  E15 Bottom center, outlet straight down  E25 Bottom right, outlet straight down  E35 Top left, outlet left, cable duct on front side (only S10) E74K2 Top right, outlet right, cable duct on front side (only S10) E96K2 Position for outlet of pneumatic lines and electric wires, unguided. Approximately 2–3 m long from the outlet; non-terminated E15 E74K2 Front view 68 E74K2 Side view 27 E74K2 E96K2 E15 E35 E25 Ducted exhaust air Code Silencer GFA10 The silencer reduces the exhaust noise of the S10/S20 control unit. Further information about single configuration steps and closing times can be found in the appendix starting on p .211 . Appropriate accessories can be found in the appendix on p .223. Proximity switch cylinder Code Closed NZ10 Open NZ20 Closed and open NZ30 The proximity switch cylinder (magnetic proximity switch on the pneumatic cylinder) determines the corresponding end positions of the piston rod of the pneumatic cylinder. Step 13 Labeling Code German, English, Strasser logo DEEN01 Language 1, Language 2, Strasser logo xxxx01 Language 1, Language 2, without logo xxxx00 xx = 2-digit ISO country code (see p .220) e.g. DEFR01 =Warnings in German and French and logo Step 12 Color Surface, gloss level Code Aluminum natural anodized ALENA RAL color (4-digit number) smooth, glossy xxxxGLGLZ Contact bar in RAL 1003 signal yellow, smooth glossy only. (Overview RAL colors see p. 218) Step 11 Safety switch type Code Euchner CES-A-LNN-SC M8 / CES-A-BBN* PT10 Euchner CES-I-AP-U-C04-SK M8 / CES-A-BBN-C04 PT12 Euchner CES-I-AP-U-C04-USI M12 / CES-A-BBN-C04 PT14 Pilz PSEN cs3.1p M8 / PSEN cs3.1 PT20 Pilz PSEN cs3.1 M12/8-0.15m / PSEN cs3.1 PT25 Schmersal RSS260-D-ST M8 / RST260-1 PT32 Sick STR1-SASM0AC5 M12 PT50 *) An external evaluation unit is required for this type. Matching evaluation units see accessories on p .229. Note: The safeguard has two safety switches as standard, in order to be able to interrogate each door leaf separately. Length of the built-in connection cable for safety switch: 10 m. The remaining cable length for the safety switch integration depends on the selected stroke and the cable outlet position. Step 14 – Options Interlock Code Internal control, pneumatically operated, without safety switch Z2P100 External control, electrically operated, with ifm GF711S safety switch Z2E280 External control, electrically operated, with Sick IME2S12-04B4DC0 safety switch Z2E290