MecLock Safeguards

35 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com S10 Step 8 Speed Step 10 Safety switch Code Position closed P10 P10 Step 10 not selectable PT10 Step 11 Safety switch E15 Step 9 Energy connection ALENA Step 12 Color Step 11 Safety switch type  Code Euchner CES-A-LNN-SC M8 / CES-A-BBN* PT10 Euchner CES-I-AP-U-C04-SK M8 / CES-A-BBN-C04 PT12 Euchner CES-I-AP-U-C04-USI M12 / CES-A-BBN-C04 PT14 Pilz PSEN cs3.1p M8 / PSEN cs3.1 PT20 Pilz PSEN cs3.1 M12/8-0.15m / PSEN cs3.1 PT25 Schmersal RSS260-D-ST M8 / RST260-1 PT32 Sick STR1-SASM0AC5 M12 PT50 *) An external evaluation unit is required for this type. Matching evaluation units see accessories on p .229. Connection cable length safety switch 10 m. The remaining cable length for the safety switch integration de- pends on the selected stroke and the cable outlet position. Proximity switch cylinder  Code Closed NZ10 Open NZ20 Closed and open NZ30 The proximity switch cylinder (magnetic proximity switch on the pneumatic cylinder) determines the corresponding end positions of the piston rod of the pneumatic cylinder. Proximity switch type  Code Festo SMT-8M NZT10 Connection cable approx. 10 m long from outlet position. Ducted exhaust air  Code Silencer GFA10 The silencer reduces the exhaust noise of the S10/S20 control unit. Further information about single configuration steps and closing times can be found in the appendix starting on p .211 . Appropriate accessories can be found in the appendix on p .223. Step 13 Labeling  Code German, English, Strasser logo DEEN01 Language 1, Language 2, Strasser logo xxxx01 Language 1, Language 2, without logo xxxx00 xx = 2-digit ISO country code (see p. 220) e.g. DEFR01 =Warnings in German and French and logo … Step 14 Options DEEN01 Step 13 Labeling Step 12 Color Surface, gloss level Code Aluminum  natural anodized ALENA RAL color (4-digit number) smooth, glossy xxxxGLGLZ Contact bar in RAL 1003 signal yellow, smooth glossy only. (Overview RAL colors see p. 218) Step 14 – Options Interlock  Code Internal control, pneumatically operated, without safety switch Z2P100 External control, electrically operated, with ifm GF711S safety switch Z2E280 External control, electrically operated, with Sick IME2S12-04B4DC0 safety switch Z2E290 The installation and combination options can be found in the appendix on p .221 . Anti-lowering lock  Code Internal control, pneumatically operated AS2P100 The installation and combination options can be found in the appendix on p .221 . Step 9 Energy connection Code Bottom left, outlet straight down  E15 Bottom right, outlet straight down  E35 Top left, outlet left, cable duct on front side E74K2 Top right, outlet right, cable duct on front side E96K2 Position for outlet of pneumatic lines and electric wires, unguided. Approximately 2–3 m long from the outlet; non-terminated E15 E74K2 Front view E74K2 Side view 68 27 E74K2 E96K2 E35 E15