MecLock Safeguards

288 www.strasser-gmbh.com - sales@strasser-gmbh.com MecLock_Katalog_2025_CAT_2505-10_EN_INT Technical Annex Overview of cable connection assignment safety switch and proximity switch and socket valve block Connection cable(s) for safety switch Order code Manu­ facturer Associated safety switch Connection diagram Pin assignment Cable lengths PT10 Euchner CES-A-LNN-SC (106601) M8 – 3 pole Conductor cross-section: 0.25 mm² 5 m 10 m 15 m 20 m 25 m 50 m PT12 Euchner CES-I-AP-U-C04-SK (115324) M8 – 4 pole 1 (BN) = U B , power supply, DC 24 V 2 (WH) = FO1A, safety output channel 1 3 (BU) = 0 V, ground, DC 0 V 4 (BK) = FO1B, safety output channel 2 Conductor cross-section: 0.25 mm² 5 m 10 m 15 m 20 m 25 m PT14 Euchner CES-I-AP-U-C04-USI (115150) M12 – 5 pole 1 (BN) = U B , power supply, DC 24 V 2 (WH) = FO1A, safety output channel 1 3 (BU) = 0 V, ground, DC 0 V 4 (BK) = FO1B, safety output channel 2 5 (GY) = Do not connect Conductor cross-section: 0.34 mm² 5 m 10 m 20 m 30 m 50 m PT20 Pilz PSEN cs3.1p (541060) M8 – 8 pole 1 (WH) = Input channel 2 2 (BN) = +24 V U B 3 (GN) = Output channel 1 4 (YE) = Output channel 2 5 (GY) = Auxiliary output 6 (PK) = Input channel 1 7 (BU) = 0 V U B 8 (RD) = Diagnostic input Conductor cross-section: 0.14 mm² 5 m 10 m 20 m 30 m PT25 Pilz PSEN cs3.1 M12/8-0.15m (541059) M12 – 8 pole 1 (WH) = Input channel 2 2 (BN) = +24 V U B 3 (GN) = Output channel 1 4 (YE) = Output channel 2 5 (GY) = Message output/diagnostic output 6 (PK) = Input channel 1 7 (BU) = 0 V U B 8 (RD) = Diagnostic input Conductor cross-section: 0.25 mm² 5 m 10 m 20 m 30 m PT32 Schmersal RSS260-D-ST (103003602) M8 – 8 pole 1 (WH) = U e 2 (BN) = Safety input 1 3 (GN) = GND 4 (YE) = Safety output 1 5 (GY) = Diagnostic output 6 (PK) = Safety input 2 7 (BU) = Safety output 2 8 (RD) = Without function Conductor cross-section: 0.25 mm² 5 m 10 m 15 m Note: The safety parameters can be found in the manufacturer‘s documentation. H11 H12 SH1 BN WH 1 4 3 CES-AZ…