MecLock Safeguards

285 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com Technical specifications Mechanical data and operating conditions Materials Main body Hard anodised aluminum / PA12 Latching claw Steel Cover Stainless steel Ambient temperature –5 °C up to +40 °C Protection IP 50 Operational life 1×10 6 Installation position Vertical or horizontal Type of connection 2 connectors (1× M12 4-pin / 1× M8 4-pin) Locking force F max 6500 N Locking force F Zh 5000 N Actuation Electrical Locking principle Closed-circuit current principle The locking mechanism is purely mechanical, using spring force combined with component geometry. Unlocking is achieved by applying voltage to the locking magnet. Electrical data (external control) Nominal voltage 24 VDC (+/– 20 %) Breakaway starting current 4.60 A (at 5 Ohm coil winding and 20 °C) Activation time 80 ms Pull-in power 101 W Holding power 7 W Holding current 300 mA Short circuit proof No Duty cycle solenoid Max. 1 s Electrical data (safety sensor) (ifm GFM711S) Operating voltage 19.2...30 VDC Rated insulation voltage 30 V Current consumption < 20 mA Protection class III Reverse polarity protection Yes Max. power-on delay time 1000 ms