MecLock Safeguards

264 www.strasser-gmbh.com - sales@strasser-gmbh.com MecLock_Katalog_2025_CAT_2505-10_EN_INT Technical Annex Control and power supply of pneumatically driven safeguards Pneumatic control unit standard S10 Connection diagram S10: The S10 control for MecLock safeguards is a 5/3G-way closed center valve. Due to the “closed center position” function of the valve block, the pane frame remains in its position even in the event of a power failure. Scope of delivery: • Valve block (factory set) • 2 × Festo MSSD-EB connection sockets (151687) • 2 × Exhaust throttles (factory set) • 2 × Reducers Ø12/10 Installation notes: • Maximum permissible hose length up to the control unit S10 from hose outlet safeguard: 3 m • Operation on customer valves or valve terminals is not permitted • No elbow fittings or throttles must be installed in the supply lines • Compressed air supply with at least 1500 l / min, filtered compressed air, filter mesh 40 μm, oiled or non-oiled • Soft-start valve not included • Coil characteristic value: 24 V DC / 1.5 W • Permitted voltage oscillations: –15 % / +10 % Pos. Type Function Type of connection 1 Connection Air supply Pneumatics; Ø 10 mm; not included in scope of delivery 2 Connection “Open” pane frame Pneumatics; Ø 12 mm; in scope of delivery 3 Control element “Close” damper - 4 Connection “Close” pane frame Pneumatics; Ø 12 mm; in scope of delivery 5 Control element “Open” damper - 30 Connection “Open” power connector Power connector DIN-EN 175301-803 Form C in scope of delivery (cable not included!) 31 Connection “Close” power connector Power connector DIN-EN 175301-803 Form C in scope of delivery (cable not included!) 40 Control element “Open” manual activation - 41 Control element “Close” manual activation - Control S10 (top view) 31 30 40 41 2 4 Control S10 (Front view) 1 2 3 4 5 30 31 40 41 Sockets included in the scope of delivery