MecLock Safeguards

215 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com Configuration steps Description Order code Color MecLock safeguards are constructed from anodised aluminum profiles. Alternatively, MecLock safeguards are also available with a powder coating in various colors (see p. 218) . ALENA GLGLZxxxx Labeling The safety and warning instructions on the MecLock safeguard can be selected in two languages (this does not include multilingual documentation). The standard documentation supplied is in German or English. Other languages must be ordered separately and are not included. DEEN01 xxxx01 xxxx00 Interlock (internal control) The interlock mechanically blocks the pane frame of pneumatically driven MecLock sa- feguards in the closed end position. This means that the MecLock safeguard cannot be opened even in the event of a complete pressure loss. The mechanical interlock is opened pneumatically. A separate control of the interlock is not necessary, as the control is already fully integrated into the pneumatic control of the MecLock safeguard. There is no separate monitoring. Z2P100 Interlock with safety switch (external control) When the MecLock safeguard is closed, the interlock (see p.284) is automatically actu- ated by the pane frame or protective field. The interlock mechanically locks the window frame of MecLock safety devices in the closed end position. Even in the event of a complete power failure, the interlock securely locks the MecLock safety device in the holding position, preventing it from opening. The interlock is opened electrically by external control via the customer's control system. The interlock has a mechanical auxiliary release to allow manual release if necessary. The interlock must be integrated into the operator's secure control system and operated via this control system. The safety sensor's connecting cable is 10 m long. The remaining cable length for the safety switch integration depends on the selected stroke and the cable outlet position. Z2E280 Z2E290 Anti-lowering lock The anti-lowering lock mechanically blocks the pane frame of pneumatically driven MecLock vertical safeguards in the open end position. Despite the use of a 5/3G actuating valve (centre position closed), the MecLock safeguard can slowly sink down due to leakage in the pneumatic components if the device is not actuated for a longer period of time or the control unit S10 or S20 is not actuated. This behaviour is effectively prevented by the use of an anti-lowering lock. The optional anti-lowering lock has no direct safety function, as the MecLock safeguard provides protection against trapping even without an anti-lowering lock. The mechanical anti-lowering lock is opened pneumatically. A separate control of the anti- lowering lock is not necessary, as the control is already fully integrated into the pneumatic control of the safeguard. There is no separate monitoring. AS2P100