MecLock Safeguards

197 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com MB10 Step 7 Material panel SB50 Step 9 not selectable E98M6K01A Step 10 Actuator position P10 – PT10 Step 11 + 12 Safety switch ALENA Step 13 Color Step 9 Motor control Code Open, close, intermediate position (half stroke) SB50 Step 11 Safety switch Code Position closed P10 Step 10 Actuator position Code Top right rear, actuator position 270° (only step 5 “R3”) E98M6K01A Top left rear, actuator position 90° (only step 5 “R4”) E78M4K01B The power connections are located directly on the actuator. All con- nection cables are available separately as accessories. For available cable lengths, see accessories on p.230. E78M4K01B only step 5 “R4” E98M6K01A only step 5 “R3” AE202621 Step 8 Actuator Step 8 Actuator Code Actuator 32/3 (230 V) with PLC, i = 10 AE202621 Actuator 32/3 (230 V) with Profinet, i = 10 AE222621 Actuator 32/3 (230 V) with PLC STO, i = 10 AE232621 Actuator 32/3 (230 V) with Profinet STO, i = 10 AE252621 Achievable speeds depending on stroke, dimensions and pane material see p. 255. Step 12 Safety switch type Code Euchner CES-A-LNN-SC M8 / CES-A-BBN* PT10 Euchner CES-I-AP-U-C04-SK M8 / CES-A-BBN-C04 PT12 Euchner CES-I-AP-U-C04-USI M12 / CES-A-BBN-C04 PT14 Pilz PSEN cs3.1p M8 / PSEN cs3.1 PT20 Pilz PSEN cs3.1 M12/8-0.15m / PSEN cs3.1 PT25 Schmersal RSS260-D-ST M8 / RST260-1 PT32 Sick STR1-SASM0AC5 M12 PT50 *) An external evaluation unit is required for this type. Matching evaluation units see accessories on p .229. Connection cable length safety switch 10 m. The remaining cable length for the safety switch integration de- pends on the selected stroke and the cable outlet position. Step 13 Color Surface, gloss level Code Aluminum natural anodized ALENA RAL color (4-digit number) smooth, glossy xxxxGLGLZ Contact bar in RAL 1003 signal yellow, smooth glossy only. (Overview RAL colors see p. 218) Step 14 Labeling Code German, English, Strasser logo DEEN01 Language 1, Language 2, Strasser logo xxxx01 Language 1, Language 2, without logo xxxx00 xx = 2-digit ISO country code (see p .220) e.g. DEFR01 =Warnings in German and French and logo Further information about single configuration steps and closing times can be found in the appendix starting on p .211 . Appropriate accessories can be found in the appendix on p .223. Step 15 – Options Interlock Code External control, electrically operated, with ifm GF711S safety switch Z2E280 External control, electrically operated, with Sick IME2S12-04B4DC0 safety switch Z2E290 DEEN01 – … Step 14 + 15 Labeling + Options