MecLock Safeguards

137 MecLock_Katalog_2025_CAT_2505-10_EN_INT www.strasser-gmbh.com - sales@strasser-gmbh.com Step 15 Safety switch type Code Euchner CES-A-LNN-SC M8 / CES-A-BBN* PT10 Euchner CES-I-AP-U-C04-SK M8 / CES-A-BBN-C04 PT12 Euchner CES-I-AP-U-C04-USI M12 / CES-A-BBN-C04 PT14 Pilz PSEN cs3.1p M8 / PSEN cs3.1 PT20 Pilz PSEN cs3.19n M12 / PSEN cs3.19 PT23 Pilz PSEN cs3.1 M12/8-0.15m / PSEN cs3.1 PT25 Schmersal RSS260-D-ST M8 / RST260-1 PT32 ABB Adam DYN-Info M12-5 / EVA General Code PT41 Step 14 Safety switch Code Position closed P10 Step 12 Speed Code Standard S10 High-speed S20 Achievable speeds depending on stroke, dimensions and pane material see p. 246/ 247 . Step 10 Material pane Code PETG, 6 mm MS10 Polycarbonate, 6 mm MS20 Polycarbonate ESD-compatible, 6 mm MS22 Aluminum, 3 mm MS30 Aluminum composite panel anodized natural, 4 mm MS60 Step 11 Material panel Code PETG, 6 mm MB10 Polycarbonate, 6 mm MB20 Polycarbonate ESD-compatible, 6 mm MB22 Aluminum, 3 mm MB30 Aluminum composite panel anodized natural, 4 mm MB60 Step 13 Energy connection Code Top left, outlet top E75 Top right, outlet top E95 Top center, outlet top E85 Top center, rear outlet E88 Position for outlet of pneumatic lines and electric wires, unguided. Approximately 2–3 m long from the outlet; non-terminated E75 Front view E88 E75 E95 E85 Side view right E88 Proximity switch type Code Festo SMT-8M NZT10 Connection cable approx. 10 m long from outlet position. Proximity switch cylinder Code Closed NZ10 Open NZ20 Closed and open NZ30 The proximity switch cylinder (magnetic proximity switch on the pneumatic cylinder) determines the corresponding end positions of the piston rod of the pneumatic cylinder. Ducted exhaust air Code Silencer GFA10 The silencer reduces the exhaust noise of the S10/S20 control unit. Further information about single configuration steps and closing times can be found in the appendix starting on p .211 . Appropriate accessories can be found in the appendix on p .223. Step 16 Color Surface, gloss level Code Aluminum natural anodized ALENA RAL color (4-digit number) smooth, glossy xxxxGLGLZ Contact bar in RAL 1003 signal yellow, smooth glossy only. (Overview RAL colors see p. 218) Step 17 Labeling Code German, English, Strasser logo DEEN01 Language 1, Language 2, Strasser logo xxxx01 Language 1, Language 2, without logo xxxx00 xx = 2-digit ISO country code (see p .220) e.g. DEFR01 =Warnings in German and French and logo Step 18 – Options Interlock Code Internal control, pneumatically operated, without safety switch Z2P100 External control, electrically operated, with ifm GF711S safety switch Z2E280 External control, electrically operated, with Sick IME2S12-04B4DC0 safety switch Z2E290 Anti-lowering lock Code Internal control, pneumatically operated AS2P100 *) An external evaluation unit is required for this type. Matching evaluation units see accessories on p .229. Connection cable length safety switch 10 m. The remaining cable length for the safety switch integration de- pends on the selected stroke and the cable outlet position. S10 Step 12 Speed E75 Step 13 Energy connection MS10 Step 10 Material pane ALENA – … Step 16 + 17 + 18 Color + Labeling + … P10 Step 14 not selectable PT10 Step 15 Safety switch MB10 Step 11 Material panel