MecLock Safeguards

110 www.strasser-gmbh.com - sales@strasser-gmbh.com MecLock_Katalog_2025_CAT_2505-10_EN_INT Vertical safety window SFV.F-B01-E-7200-FOVxxxx-…-MB00 Product SFV.F Series B01 (straight design) Actuator Servo-electric Size 7200 Version FOV Installation Wall mounting Mounting Rear side or laterally inside Dimensions Vertical SafetyWindow SFV.F-B01-E-7200-FOVxxxx-…-MB00 Mounting Step 6 Design door leaf Code Single-leaf FS11 Step 7 Closing direction Code From top to bottom R1 Side profile left Side profile right Step 3 Stroke [mm] Code Freely definable 600 - 2200 Hxxxx Step 4 Clear width [mm] Code Freely definable 1000 - 4000* Lxxxx *) with intermediate profile(s) in pane and panel frame Step 5 Dimension D [mm] Code Stroke + at least 200 mm 800 - 2400 Dxxxx (upper edge of protective field = dimension D + 135 mm) If retrofitting a cover panel above the protective field is to remain possible, a dimension D ≥ stroke + 200 mm must be selected. Step 9 Material panel Code Without cover MB00 Step 8 Material pane Code PETG, 6 mm MS10 Polycarbonate, 6 mm MS20 Polycarbonate ESD-compatible, 6 mm MS22 Aluminum, 3 mm MS30 Aluminum composite panel anodized natural, 4 mm MS60 Tempered safety glass (ESG), 4 mm MS40 Order code SFV.F-B01-E-7200 481 22 32 195 205 150 217 Clear width + 250 (±2) Clear width (±2) Loading height Pane Pane FOVxxxx + DIM D + 135 (±2) Stroke (±2) DIM D + 135 (±2) from clear width > 1000 mm version with intermediate profile from clear width > 2000 mm version with 2 intermed. profiles from clear width > 3000 mm version with 3 intermed. profiles Intermediate profile Shortened overall height, without panel and without lower strut – Servo-electric actuator Step 1 Version Code Window with shortened FOVxxxx overall height, without panel and without lower strut Minimum height: Dimension D + xxxx + 135 mm (Condition: xxxx ≥ 0.3 × stroke and xxxx ≥ 200 mm) xxxx The total height depends on the selected actuator position. Step 2 Cross profile position Code Standard QPS FOVxxxx – QPS Step 1 + 2 Version + not select. D1200 Step 5 Dimension D MS10 Step 8 Material pane FS11 – R1 Step 6 + 7 not selectable MB00 Step 9 not selectable H1000 – L2000 Step 3 + 4 Stroke + Clear width Suitable T-slot nuts see accessories on p. 229