MecLock Safeguards

228 www.strasser-gmbh.com - sales@strasser-gmbh.com MecLock_Katalog_2025_CAT_2505-10_EN_INT Accessories Other accessories suitable for all MecLock safeguards with servo-electric actuator Description Code Programming set withT-adapter for online diagnosis and changing of programme and parameter values in the motor control. TheT-adapter is looped into the 24-volt signal line and enables mobile online diagnosis of different servoelectrical MecLock safeguards. Operation with motor parameters other than those set in the factory is only permitted after consultation with Strasser GmbH. (Content: T adapter for signal cable, serial cable 2 m, USB to RS232 adapter, installation CD-ROM for ServoLink programming software) 017369 Programming set with terminal box for integration in control cabinet The terminal box is permanently installed in the control cabinet and the 24-volt signal line is clamped on there. This enables online diagnostics directly at the control cabinet without direct plugging in at the motor (e.g. if the motor is difficult to access due to its height). Due to the fixed installation, a separate terminal box is required for each MecLock safeguard. Operation with motor parameters other than those set in the factory is only permitted after consultation with Strasser GmbH. (Content: terminal box, USB cable, installation CD-ROM for ServoLink programming software) 022548 Terminal box for integration in control cabinet (see p.278) The terminal box is permanently installed in the control cabinet and the 24-volt signal cable is clamped onto the terminal box. The USB port on the terminal box enables online diagnostics directly on the control ca- binet without having to connect the T-adapter to the motor (e.g., if the motor is difficult to access due to its height). Due to the fixed installation, a separate terminal box is required for each MecLock safeguard. 018509 Tubular fixed resistor For very large MecLock safeguards (e.g. SFV.F series) with minimum pause times, the use of a tubular fixed resistor or advice from Strasser GmbH is recommended. Suitable power cables see p.229. Tubular fixed resistor for servomotor 230 V (see p.279) 018796 Tubular fixed resistor for servomotor 400 V (see p.279) 034110 Programming sets, tubular fixed resistors, evaluation unit, fastening and test rod